- 01000502545
-
This email address is being protected from spambots. You need JavaScript enabled to view it.
EZConvert MB705M2P-B
Product introduction
ICY DOCK's EZConvert MB705M2P-B converts an M.2 NVMe PCIe SSD into the exact dimensions and port locations as a standard 2.5-inch U.2 (SFF-8639) NVMe SSD without using any tools or screws for drive installation. The MB705M2P-B can be installed anywhere that accepts a bare 2.5-inch U.2 NVMe drive, such as a U.2 backplane, 2.5" mounting bracket, or ICY DOCK U.2 NVMe removable enclosures/mobile racks. The sturdy aluminum heat sink housing protects the delicate M.2 circuit board from bumps and drops, and work perfectly with the included thermal pad for optimal heat dissipation to keep your drive running cool, even under heavy load.
Removable Design
Because M.2 SSDs are not designed to be frequently swap, their connectors are very delicate, typically rated for only 250 insertion/removal cycles. The EZConvert MB705M2P-B has a durable U.2 connector rated for 10,000 insertion/removal cycles, allows you to add, remove, and replace drives without putting any wear on the internal connector.
Perfect Compatibility
EZConvert MB705M2P-B accepts any 30mm-80mm M.2 PCIe NVMe SSD (2230 / 2242 / 2260 / 2280) and gives it the exact same dimensions, port locations, and screw-hole locations as a standard 9.5mm U.2 NVMe SSD.
Tool-less installation
The 1-piece heat sink lid snaps on and off without screws or tools, revealing the drive bay for easy installation, removal, and replacement in only seconds.
The adjustable M.2 locker slides to accommodate all standard M.2 PCIe NVMe SSD drive lengths, including 2230 (30mm), 2242 (42mm), 2260 (60mm), and 2280 (80mm). The locker clips into the SSD screw hole to secure the drive without screws, saving you the hassle of dealing with tiny easy-to-lose screws while protecting your drive from vibration and movement damage.
(1).Adjust the M.2 locker to your desired M.2 NVMe SSD length.
(2).Insert the M.2 NVMe SSD into the M.2 connector.
(3).Press down the M.2 NVMe SSD.
(4).A “click” sound will be heard once the M.2 NVMe SSD is secured in place.
(2).Insert the M.2 NVMe SSD into the M.2 connector.
(3).Press down the M.2 NVMe SSD.
(4).A “click” sound will be heard once the M.2 NVMe SSD is secured in place.
Because the MB705M2P-B uses the standardized 2.5-inch U.2 form-factor, it can be installed into any U.2 backplane, 2.5-inch mounting bracket, or ICY DOCK U.2 NVMe removable enclosures/mobile racks such as MB699VP-B for multi-drives or MB601VK-B / MB601VK-1B for a single drive.
Packed with Features
The dual-function full-metal lid protects delicate M.2 SSDs from bumps and drops. The aluminum lid also acts as a heat sink to keep NVMe drives at safe temperatures, even under heavy load.
The included thermal paste sticker can be attached on to the underside of the full-metal lid for increased heat dissipation.
For additional cooling performance, the bottom air vent can be cut out to make room for an M.2 heat sink, or for additional air flow.
The MB705M2P-B supports the full NVMe bandwidth specification of up to 64Gbps, letting you take full advantage of the fastest M.2 NVMe SSDs available.
Pair it with the USB 3.2 to U.2 NVMe SSD Reader (EZ-Adapter MB931U-1VB)
The EZ-Adapter MB931U-1VB is compatible with EZConvert MB705M2P-B and works with any USB ports, giving you the utmost flexibility of accessing M.2 NVMe On-the-Go.
Main Features
• Convert your M.2 NVMe SSD into the 2.5” U.2 NVMe form factor with 9.5mm height)
• Exact same dimensions, port locations, and screw-hole locations as a standard U.2 drive
• Accepts any M.2 PCIe NVMe SSD from 30mm to 80mm in length (2230 / 2242 / 2260 / 2280)
• 10,000 insertion/removal cycle rated U.2 connector
• Supports full Nvme bandwidth specification of 64Gbps
• 100% tool-less and screw-less M.2 drive installation
• Dual-function aluminum heat sink and lid for optimal protection and cooling performance
• Lower housing ventilation hole can pop out for additional air flow and improved cooling
• Strong 1-piece ABS plastic lower body
• Supports U.2 (SFF-8639) cables
• Fits into any U.2 backplanes, 2.5-inch mounting brackets, or ICY DOCK U.2 NVMe SSD enclosures
| Specification | |
|---|---|
| Color | Black |
| Compatible Drive Type | M.2 PCIe 3.0/4.0 NVMe SSD |
| Host Interface | 1 x U.2 SFF-8639, pin-out defined by SFF-9402 Rev 1.1 (Tri-mode HBA/RAID card compatible) |
| Humidity | 5%~65% RH |
| Model Number | MB705M2P-B |
| Number of M.2 | 1 |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Package Contents | Device, mounting screws, user manual, thermal pads |
| Structure / Material | Aluminum & ABS plastic |
| Support Drive Size | 1 x M / B + M key M.2 PCIe NVMe SSD 2230/2242/2260/2280 |
| Support HDD Capacity | No limitation |
| Support Hot-Swap | Yes |
| Transfer Rate | Up to 64Gbps |
| U.2 Connector Insertion Rate | 10,000 |
There are no reviews for this product.
Verification code *
EZ-Adapter MB104U-1SMB
Call for Price:
ICYNano MB861U31-1M2B
Call for Price:
ExpressSlot Elite MB842MP-B
Call for Price:
ExpressSlot Slide MB204MP-1B
Call for Price:
ExpressSlot Core MB305M4P-B
Call for Price:
